Symons Crusher Equipment

Benefits & Advantages
1. Higher capacity and less wear costs.
2. Wide range of application suitability.
3. Easy to maintain, reduce the downtime and maintenance costs.
4. Stable running performance and easy operation.
Symons cone crusher Description
Symons cone crusher Introduction
Feed size: 30 ~ 369mm Output: 80 ~ 1,000 tons / hour
Symons cone crusher used in the construction of rubble, sand production process, especially when broken basalt and other hard materials, not only high efficiency, low production costs, and broken a good grain products, high quality sand and gravel aggregate.
Symons cone crusher Features
1, high performance: The cavity design and optimization of rational use of the combination of speed and stroke, making the model move in the same cone diameter of the acting up. Therefore, with the same type of spring cone crusher, compared with higher performance and productivity.
2, the product a good grain size: The broken pyramid principle, the proportion of the product significantly improved in the cube, flake stone needles reduced grain size more uniform.
3, good stability: When there is iron and other non-broken when the material into the machine, over iron protection device will automatically be released, and then automatically reset. Iron protection over the discharge opening with a fixed return point, miscellaneous iron through the crushing chamber, it can quickly restore the discharge opening.
4, clear cavity convenient: If the spring cone crusher downtime in the load condition, the hydraulic clean cavity system can quickly clean up the crushing chamber, greatly reducing downtime.
5, high reliability: large diameter shaft, heavy-duty main frame and an independent oil lubrication system, automatic control system to ensure that the equipment, durable, reliable operation.
6, easy maintenance, easy to operate: all parts are removable to the side from the top or to the cone and fixed cone assembly can be easily split out. Bronze bearing broken in the high shock and vibration environment to maintain excellent load bearing performance and more economical than the rolling bearing, maintenance more convenient.
7, the production cost is low: the large capacity, high reliability, easy maintenance, greatly reduce production costs.
8, widely used: Symons cone crusher is characterized by the crusher to produce the best performance for a variety of crushing process: from the special crushing to the crushing, breaking from the fixed to mobile crusher station.
9, split Lubrication: Multi-point control of an independent lubrication system to ensure that the machine bearings lubricated dual protection, and automatic machine can achieve security.
Application
symons cone crusher, can be widely used in metal and nonmetal mines, cement, construction, metallurgy, transportation, aggregate production and other industries. Especially for iron ore, gold ore, nonferrous metal ores, granite, basalt, diabase, quartzite and other hard, medium hard ore and rock.
symons cone crusher used in the construction of rubble, sand production process, especially when broken basalt and other hard materials, not only high efficiency, low production costs, and broken a good grain products, high quality sand and gravel aggregate.
symons cone crusher used in black, non-ferrous mineral processing, can effectively reduce the size of ore into the mill, multi-break less grinding, both to improve the mills production capacity, and energy-saving, section steel, a substantial increase processing plant economic benefits.
Structural Drawing
Working Principle
symons cone crusher work, by the motor through belt and large pulley, drive shaft, a small bevel gear, a large bevel gear driven eccentric rotation, the axis line of cone crushing the force in the eccentric sleeve by rotating the swing next move, making the broken sometimes close to the wall surface and mortar wall from time to time to leave the rolling surface, so that the material in the fixed cone and fixed cone crushing cavity composed of the ring constantly under attack, pressing and bending and breaking. After repeated squeezing, shock and bending, the material crushing to the required size, the lower discharge.
Grain size curve:
Symons Cone Crusher Technical Data
| Model | Crushing Feet Ft (inch) |
Max Feed Size (inch) |
Min Discharge opening (inch) |
Weightt | Main Motor Power (kw) |
Close Discharge Size(inch) Capacity(T/H) | ||||
| 1/4 " | 3/8 " | 1/2 " | 5/8 " | |||||||
| 2 ft | 3 1/3 | 6 5/16 | 1/2 | 10.8 | 90-110 | 70 | 90 | |||
| 2 ft | 3 1/3 | 4 17/32 | 25/64 | 10.8 | 90-110 | 55 | 65 | 70 | ||
| 2 ft | 3 1/3 | 3 5/32 | 21/64 | 10.8 | 90-110 | 47 | 50 | 60 | 67 | |
| 3 ft | 3 3/4 | 7 1/8 | 1/2 | 16 | 110-132 | 105 | 120 | |||
| 3 ft | 3 3/4 | 5 1/8 | 25/64 | 16 | 110-132 | 72 | 92 | 105 | ||
| 3 ft | 3 3/4 | 3 35/64 | 25/64 | 16 | 110-132 | 70 | 90 | 100 | ||
| 4 ft | 4 1/4 | 7 7/8 | 5/8 | 23 | 132-160 | 135 | ||||
| 4 ft | 4 1/4 | 5 29/32 | 1/2 | 23 | 132-160 | 105 | 125 | |||
| 4 ft | 4 1/4 | 4 1/64 | 25/64 | 23 | 132-160 | 80 | 105 | 135 | ||
| 4 1/4'ft | 4 1/2 | 8 15/32 | 3/4 | 27 | 185-220 | |||||
| 4 1/4'ft | 4 1/2 | 6 5/16 | 5/8 | 27 | 185-220 | 130 | ||||
| 4 1/4'ft | 4 1/2 | 4 17/32 | 1/2 | 27 | 185-220 | 135 | 170 | |||
| 5 1/2'ft | 5 | 9 1/4 | 7/8 | 37.8 | 185-220 | |||||
| 5 1/2'ft | 5 | 6 57/64 | 3/4 | 37.8 | 185-220 | |||||
| 5 1/2'ft | 5 | 5 1/8 | 1/2 | 37.8 | 185-220 | 170 | 190 | |||
| 7 ft | 5 1/2 | 10 1/2 | 7/8 | 44.3 | 250-300 | |||||
| 7 ft | 5 1/2 | 7 63/64 | 5/8 | 44.3 | 250-300 | 210 | ||||
| 7 ft | 5 1/2 | 5 1/2 | 1/2 | 44.3 | 250-300 | 170 | 205 | 240 | ||
Note: This specification is just for reference, any changes are subject to the Symons cone crusher products
Symons Crusher Equipment Manufacturer,Supplier&Factory search on:Google, Yahoo, Msn









